PLA Rapido Silk Filament
PLA Rapido Silk Filament
PLA Rapido Silk Filament
PLA Rapido Silk Filament
PLA Rapido Silk Filament

PLA Rapido Silk Filament

Regular price€31,99
/
Tax included. Shipping calculated at checkout.

Product Features

  • Silk Gloss Finish

  • Higher Toughness

  • Easy to Print & Beginner Friendly

  • Diameter: 1.75mm +/- 0.02mm

Cautions for Use

  • Chamber enclosed not recommend

Weight
Ship From
Color
  • In stock, ready to ship
  • Inventory on the way

QIDI PLA Rapido Silk 3D Printer Filament

Metal Surface Texture | No Warpage | Tangle-free | Smooth Printing


QIDI PLA Rapido Silk Filament Advantage

High Clossy Silk Texture



High Toughness

Repeated bending, not easy to brittle break. Have better durability



Product Size

QIDI PLA Rapido Silk filament 1.75mm. Works perfectly with most FDM 3Dprinters on the market.


Accessory Compatibility

Recommended Not Recommended
Build Plate QIDI PEI Plate, HF Plat, PC Plate and Smooth Plate /
Hotend Brass/Copper plated Nozzle (0.2/0.4/0.6/0.8 mm) Bimetal Nozzle ( 0.4 / 0.6 / 0.8 mm) Hardened Steel Nozzle ( 0.4 / 0.6 / 0.8 mm)
Glue Glue Stick/ 3D LAC adhesive spray /

 

Recommended Printing Settings
Drying Settings (Blast Drying Oven) 50 °C,4-6 h
Printing and Keeping Container's Humidity < 15% RH (Sealed, with Desiccant)
Nozzle Temperature 210 - 230 °C
Bed Temperature (with Glue) 60 °C
Printing Speed 40-200 mm/s
Physical Properties
Density 1.24 g/cm³
Vicat Softening Temperature 60 °C
Heat Deflection Temperature 53 °C
Melting Temperature 160 °C
Melt flow rate 5~10 g/10 min
Mechanical Properties
Tensile Strength 31~33 MPa
Breaking Elongation Rate >30 %
Bending Modulus 3900~4100 MPa
Impact Strength 17-22 kJ/m²



Printing Tips

1. Reduce print speed: PLA silk is more viscous than regular PLA. Lower print speeds are recommended to minimize pulling and improve surface smoothness.
2. Use proper substrate adhesion: PLA Silk may be more prone to warping in some cases, so make sure that the print bed is clean and that proper adhesion measures are used (PEI sheet or glue, etc.).
3. Do not print too large overhangs: PLA Silk has a higher fluidity at high temperatures, so when printing overhangs, the material does not easily hold its shape in the air.
For more details please refer to: Filament Guide on WIKI.