QIDI Cool Plate
Upgrade your 3D printing experience with our Cool Plate, designed for PLA/PETG.


Say goodbye to print failures
Super sticky coating designed for PLA and PETG filaments can provide good adhesion to the printer and effectively improve print success rate. No adhesive is required, the bottom of the print is still smooth and stable, and the bottom of the print is reduced when printing large objects.


Eliminating Adhesion Issues
QIDI cool plate is suitable for surfaces with bad shape surface. It can still provide super strong adhesion with a small contact area. It avoids the situation where the prints are scattered all over the floor when removing the printing plate.


How to remove prints from Cool Plate
Use the scrapper included with your printer to gently lift the print, then pry it off carefully. If the print is stuck too tightly, wait for the print plate to cool before removing it. The surface is soft. Be careful when using a scraper to remove printed parts.


About the maintenance of QlDl Cool plate
You can clean the surface with water and detergent if heavy dirt appears. DO NOT use organic solvents (especially acetone) to clean the build plate, as it will damage the surface adhesive layer. The QIDI PLA Silk material exhibits strong adhesion on the QIDI Cool Plate, which may damage printed models. Therefore, we do not recommend using Silk material on the QIDI Cool Plate. For users printing with third-party PLA Silk materials, please select the Generic PLA Silk preset in QIDI Studio and evaluate material compatibility based on the specific conditions.


Product specifications
Item | Specifications |
Material | Spring steel plate + low temperature super sticky coating |
Color |
Blue |
Surface temperature resistance | 120℃ |
Thickness | Spring steel plate 0.5mm 2X Coating on each side,Each Coating 0.05mm The top edge of the printing plate may appear thicker due to paint accumulation, which is normal |
Printing size | 305*305mm/245*245mm |
Packing size | 375*345*15mm/300*265*15mm |
Packing weight | 0.5kg/0.35kg |