MakeBuddy Smart5 TechSpecs
MakeBuddy Smart5 Technical Specifications
|
Printing Technology Fused Deposition Modeling (FDM) |
Print Size (W*D*H) 180*180*180 mm |
|
Printer Dimensions 322*344*410 mm |
Package Dimensions 400*380*455 mm |
| Net Weight 10kg | Gross Weight 14.5kg |
|
XY Structure CoreXY |
X Axis 8mm High Hardness Linear Hollow Steel Shafts |
| Y Axis 8mm High Hardness Linear Hollow Steel Shafts | Z Axis Single Z-axis Motor + Timing Belt, 8mm Linear Shafts and Screws |
| Shell Plastic | Chassis Plastic + Steel |
| Motor 42-48 High-Speed Motor | Max Speed of Tool Head 600mm/s |
| Acceleration ≤20000mm/s^2 |
Print Head Temperature ≤ 300℃ |
|
Hot Bed Temperature ≤ 80℃ |
Printing Platform Aluminum Substrate Heating Bed |
|
Printing Plate Double-sided Cool Plate Pro |
Hotend Ceramic Plate Heating, Quick Swap Hotend |
|
Temperature Measurement Unit Thermocouple |
Extruder Gear Hardened Steel Single Gears |
| Nozzle Diameter 0.4mm （0.2/0.6/0.8mm Optional） | Filament Cutter Yes |
| Filament Diameter 1.75mm |
Supported Filament PLA, PETG, etc. |
|
Air Filter HEPA Filter + Coconut Shell Activated Carbon + Breathable Mesh Fabric |
Hot End Cooling Fan 4-Pin PWM Fan with RPM Feedback |
|
Model Cooling Fan 4-Pin PWM Fan with RPM Feedback |
Motherboard Fan Voltage-controlled Fan |
| Chamber Circulation Fan Voltage-controlled Fan | Filament Detection Run Out Sensor (mounted above extruder), and Tangle Detection (QIDI BOX required) |
| Automatic Leveling Hands-free Automatic Leveling（Loadcell Sensor Integrated into the Hotend） | Timelapse Yes (Built-in Camera) |
| Input Shaping Yes | Power Loss Recovery： Yes |
| Voltage 110V / 220–240V AC, 50/60Hz (region-specific models available) | Rated Power 115V:150W / 220V:150W |
| Camera Camera (Up to 1080P) | Display Screen 4 Inch 800*480 Touch Screen |
| Storage 32G EMMC and USB2.0 Flash Drive | Connectivity Wi-Fi (2.4GHz/5GHz), USB |
| Stepper Motor Driver Cortex-M7 based Current-Loop Stepper Servo Control | Control Interface Touch Screen, Mobile APP, PC Application |
| Slicer QIDI Studio and other third-party software, such as Orca, PrusaSlicer etc. | File Formats for Slicing STL, OBJ, 3MF, STEP (.stp/.step), etc. |
| Operating System Windows, MacOS, Linux | Seal Print Compatible |
MakeBuddy Smart5 TDS
Download
Tips:
- For better print quality, please use the QIDI official filaments.
- The printer’s voltage specifications vary by sales region. Before use, please check the label next to the power socket on the printer to ensure the supplied voltage matches the indicated voltage.
- To ensure the heatbed quickly reaches the needed temperature, the printer will maintain maximum power for about 3-5 minutes.
- Special area: Lower-right 11×22 mm area is non-printable by default. Remove cutter for full-plate printing.
