[Qidi X-CF Pro, speziell für den Druck von Kohlefaser und Nylon entwickelt] - [QIDI Online Shop DE]
PC/ABS-FR Filament
[Qidi X-CF Pro, speziell für den Druck von Kohlefaser und Nylon entwickelt] - [QIDI Online Shop DE]
[Qidi X-CF Pro, speziell für den Druck von Kohlefaser und Nylon entwickelt] - [QIDI Online Shop DE]
[Qidi X-CF Pro, speziell für den Druck von Kohlefaser und Nylon entwickelt] - [QIDI Online Shop DE]

PC/ABS-FR Filament

Preço normal€62,99
/
Imposto incluído. Envio calculado na finalização da compra.

Características do Produto

  • Excelente Resistência a Chamas

  • Robusto e Durável

  • Vem com Carretel de Alta Temperatura

  • Diâmetro: 1,75mm +/- 0,02mm

Cuidados a ter em conta

  • Impressoras com caixa de proteção necessárias

  • Aquecimento ativo da câmara necessário

Weight
  • Em estoque
  • Inventory no caminho


QIDI PC/ABS FR 3D Printer Filament

QIDI Flame Retardant PC/ABS alloy 3D Printing Filament. QIDI PC/ABS-FR is an excellent flame-resistant material which is based PC/ABS. It is safer and more environmentally friendly, while still maintaining the excellent mechanical properties and heat resistance of PC/ABS

PC/ABS PC/ABS


Excellent Flame-resistant And Self-extinguishing Performance

By adding non-halogen flame retardant, PC/ABS has excellent self-extinguishing performance, and the flame-retardant grade can reach UL94 V-0 level (2mm).

PC/ABS PC/ABS






Safe and non-toxic after burning

QIDI PC/ABS FR compared with materials with halogen flame retardants, QIDI PC/ABS-FR will not release much smoke and toxic gases after burning.


PC/ABS PC/ABS




Accessory Compatibility

Recommended Not Recommended
Build Plate QIDI PEI Plate, QIDI Smooth Plate and Glass Plate PC Plate
Hotend Hardened Steel Nozzle ( 0.4 / 0.6 / 0.8 mm)
Bimetal Nozzle ( 0.4 / 0.6 / 0.8 mm)
Brass/Copper plated Nozzle (0.2/0.4/0.6/0.8 mm)
Glue PVP glue/ 3D LAC adhesive spray /


 

Recommended Printing Settings
Drying Settings (Blast Drying Oven) 70-80 °C,4-6 h
Printing and Keeping Container's Humidity < 15% RH (Sealed, with Desiccant)
Nozzle Temperature 260 - 280 °C
Bed Temperature (with Glue) 70-80 °C
Chamber Temperature 60-80 °C
Printing Speed < 30-120 mm/s
Physical Properties
Density 1.08 g/cm³
Water absorption 2.10 %
Heat Deflection Temperature 102 °C
Melting Temperature 250 °C
Melt Index 4 g/10 min
Mechanical Properties
Tensile Strength 40.10±0.14 MPa
Breaking Elongation Rate 3.06±0.30 %
Bending Modulus 2041.17±25.67 MPa
Bending Strength 67.79±0.47 MPa
Impact Strength 19.90±1.65KJ/m2



Printing Tips

• PC/ABS material in the printing process needs to have a higher ambient temperature to help release the residual stress in the molding process of the parts, in the printing process, please keep the printer closed to avoid warping and cracking of the printed parts. Please keep the printer closed during the printing process to avoid warping and cracking of the printed parts. If the device has a heating chamber function, it is recommended to set the heating chamber temperature at 60-80°C. If the device is equipped with a heating chamber, it is recommended that the temperature of the heating chamber be set between 60-80°C.
For more details please refer to: Filament Guide on WIKI.




Vacuum Aluminum Foil Packaging

According to the test, the water vapor transmission rate of ordinary sealed packaging is 4.76%, while the water vapor transmission rate of vacuum aluminum foil packaging we use is only 0.014%. It can be seen that vacuum aluminum foil packaging is more water-resistant.

PC/ABS PC/ABS


Product Size

QIDI TECH UltraPA filament 1.75mmWorks perfectly with most FDM 3Dprinters on the market.

PC/ABS PC/ABS

PC/ABS PC/ABS
PC/ABS